Tablet Press Machine – High Speed Double Rotary Tablet Press (“ACCURA” MODEL ACT-V)

SKU: 185cf519a819 Category:

Description

Tablet Press Machine (Pill Press) with Pre Compression 2 Tons & Main Compression 10 Tons

29 STN “D” Tooling / 37 STN “B” Tooling / 47 STN “BB” Tooling

Maximum Output-3,38,400 Tablets / Hour (CFC AND AWC – OPTIONAL)

TECHNICAL SPECIFICATION
TYPE ACT – V 29 ACT – V 37 ACT – V 47
NUMBER OF STATIONS 29 37 47
TYPE OF TOOLING (AS PER EU1) D B BB
OUTPUT – TABLET / HOUR* (MIN. /MAX.) 41,760 / 2,08,800 53,280 / 2,66,400 67,680 / 3,38,400
MAX OPERATING PRESSURE MAIN (KN) 100 100 100
MAX OPERATING PRE –PRESSURE TAMP (KN) 20 20 20
MAX TABLET DIAMETER ROUND (MM) 25 16 11
MAX. TABLET THICKNESS (MM) 8.5
MAX DEPTH OF FILL (MM) 4.5 – 10 FOR “D” & “B” & “BB” Tooling
(WITH THREE DIFFERENT LOWER TRACK) 8.5 – 14 “D” & “B” & “BB” Tooling
  12.5 – 20 SUITABLE FOR “D” Tooling
UPPER PUNCH ENTRY MAIN (MM) 1 TO 6
UPPER PUNCH ENTRY PRE- COMPRESSION (MM) 1 TO 6
POWER – TOTAL (KW/HP) 8.40 KW / 11.20 HP
MAIN ELE. MOTOR (KW/ HP) 7.5 KW / 10 HP X 1440 RPM
PRE.PRESS ROLL ELE MOTOR(KW/HP) 0.025/0.0335, 1440 RPM X 2 NOS = 0.05 / 0.067 KW/HP
MAIN PRESS ROLL ELE. MOTOR (KW/ HP) 0.025/0.0335, 1440 RPM X 2 NOS = 0.05 / 0.067 KW/HP
WEIGHT ADJ. ELE MOTOR (KW/HP) 0.025/0.0335, 1440 RPM X 2 NOS = 0.05 / 0.067 KW/HP
FEEDER ELE. MOTOR (KW/HP) 0.37/0.50, 1440 RPM X 2 NOS = 0.74 / 1.0 KW/HP
HOPPER CAPACITY 17 LTR
OVERALL DIMENSIONS (CM) (WITH CLOSE GUARD) 135 L X 126 W X 205 H CM
OVERALL DIMENSIONS (CM) (WITH OPEN GUARD) 271 L X 271 W X 205 H CM
NET WEIGHT (Kg.) 3,500 kg.Approx
GROSS WEIGHT (Kg.) 4,000 kg.Approx
UTILITES 1). SUCTION : – 150 CFM
  2). COMPRESSED AIR: 5KG /SQ.CM (5 BAR)
  3). POWER SUPPLY :- 415 V 3 PHASE, 50 HZ

Depending upon material characteristic & available room atmosphere only.

Pre-pressure and Main pressure could be changed depending upon the size of the compress and filling depth, Powder or granulation.It is dependent on the physical specification of the used material for the compress.

tablet press machine is an electro-mechanical device that transforms powder into tablets of uniform sizes and thickness by using compressive forces. Fluidpack brings to you Tablet Press Machine – High Speed Double Rotary Tablet Press (“ACCURA” MODEL ACT-V) to speed up the tablet press process giving high yields. The output of the machine can be up to 3,38,400 Tablets / Hour. The machine has a sturdy build up ensuring the machine can perform the operation of pill press for longer durations. The structure of the machine is fabricated in a manner to ensure the operation without any vibration. The pre- pressure and main pressure of the pill pressing machine can also be regulated allowing you to vary the raw materials for the operation.

The High Speed double rotary tablet press comes with a sturdy structure design ensuring the reliability of the machine. The tablet press machine has its four sides open with upper guards with a separate control panel. The machine is in compliance with cGMP and performs a vibration-free operation with easy operation at 60 RPM. The load cell is provided in the tablet press machine at main-compression for pressure measurement. It comes with a motorized pre-compression of 2 Tons (20 KN). The motorized main compression is set at 10 tons (100 KN). The main power motor of the machine powers 15Hp.

The above specification and Features of the Machineries are subject to change without any prior notice for the technicaldevelopment.

SALIENT FEATURES
  • DOUBLE ROTARY HIGH SPEED TABLET PRESSES
  • In complience with cGMP.
  • This tablet compression machine is with Motorized pre compression of 2 Tons. (20 KN)
  • With Motorized main compression of 10 Tons. (100 KN)
  • Motorized dozer, for precise dept of fill adjustment is with this pill press machine.
  • With Load cell at Main-Compression For Pressure measurement
  • With PLC & Colour MMI Touch Screen on Separate Operating Pannel.
  • This Tablet Press Machine is Four sides open with upper Guards. Control panel is separate.
  • With AC Variable Drive & Zero Clearance Feeder Frame
  • Vibration free and easy to operate at 60 RPM
  • With Sturdy Structure design.
  • With Sampling & Startup rejection
  • Power Main motor 15 Hp.
  • CFC & AWC Facility (Optional)
  • Auto rejection (Optional)
  • Bi layer attachment (optional).

For more details, Please click here.